AllerAir AirMedic+ User Manual download pdf (Page 4)

ALLERAIR'S AIR PURIFICATION SYSTEM

LASER TESTED TRUE HEPA

HEPA (High Efficienc y Particulate Arrestance) filters were developed for the Atomic

Energy Commission to remove radio ac tive dust from their laboratories.The are now the

primary filtration systems for electonic clean room assembly, hospital surgeries, bio

engineering, pharmaceutical laboratories and any other space where clean air is critical.

HEPA will trap microscopic dust which will give you distress from allergies, asthma,

respiratory problems, chemical sensitivities and sick building syndrome. It will trap

99.97% of all particles down to 0.3 microns (including bacteria, dust mite antigens,

respiratory particles, fungal and other microbiologicals. For these reasons that HEPA

filtration is recommended by more allergists, medical professionals and clean air

consultants than any other filter system available.

CARBON FILTER (ACTIVATED AND GRANULATED)

We use only activated granular carbon mixed with zeolite and specially impregnated

carbons. We stay away from dust carbon which has been impregnated onto a poly or

foam material. This type of carbon filter has to be changed as often as every week to be

fully effective. AllerAir's carbon filter can last up to 2 or 3 years and more, depending on

the level of toxins in the area.

The activated carbon we use can adsorb up to 60% of its own weight in toxic gases,

fumes and chemicals. These toxic substances make us ill, and are found in every home,

office and industry.

OTHER FILTERING SYSTEMS AVAILABLE

Ozone generators, negative ion machines and elec trostatically charged units all

generate ozone which is a toxic substance. Any unit which provides ozone cannot be

recommended by Health and Welfare or by the Lung Association.

AllerAir's units on the other hand do not produce any ozone whatsoever. The latest air

purification technology does not add anything to the air (especially impurities like

ozone or P.V.C.s). AllerAir's unit scrubs impurities and toxins out of the air.

ENERGY COSTS

We use a high efficiency motor which cost pennies a day to operate in contrast to

almost all other manufactures who use the lowest price motor available. One of the

reasons we can offer ten year warranty is because of the sophisticated motor we use. We

have spared no effort to give you the most for the least.

ADDITIONAL INFORMATION

The AirMedic+ unit you have purchase is equiped with a variable speed control to allow

you to control the air flow and sound to a very low level.

The air coming out of the unit may feel cool to your hand, but the temperature of the air

is actually the same. And AllerAir units are specially designed to have no offgasing

because our entire unit housing is made of steel.

IMPORTANT NOTICE

To receive maximum use of HEPA filter media when used in freshly painted room, you

should first remove the HEPA filter from the unit to avoid contaminating the HEPA

media. Turn unit off and Unplug unit. Remove bottom screws. Open bottom of unit,

Grasp outer filter ring firmly with both hands and remove carefully. Close unit, plug into

grounded receptacle then turn on. Replace carbon filter before reinstalling HEPA filter.

Do not allow any object to be stuck or poked into any opening of the unit.

Never service the unit before turning unit off and removing electrical plug

from the wall receptacle.

AllerAir Industries Inc.

Toll free: 1-888-852-8247 / Fax: 1-877-688-2193 www .aller air.com

4 5

FILTER ASSEMBLY - Air Medic D

D Models have a 3" deep carbon filter.

STEP 7

Place lid back to its proper

position by aligning the arrow

with the rear seam.

STEP 8

Replace the four screws.

STEP 9

Turn the unit back onto its

wheels. It is now ready for

immediate use.

STEP 1

Turn Power off and

unplug receptacle.

Lay unit upside down.

STEP 2

With a #2 Philips screw driver,

remove the four screws from

the bottom of the unit.

STEP 3

Gently grasp wheels.

Remove base by gently pulling

on the wheels

STEP 4

Remove only one of the white, felt,

donut-shaped gaskets from the inside

of the purifier body.

STEP 5

Insert the carbon filter (either a

Model 600D Carbon)

STEP 6

Replace the gasket that had been

removed in STEP 4.

1 2 3 4

Comments to this Manuals

No comments

AllerAir AirMedic+ User Manual Page 4

Comments to this Manuals

Related products and manuals for Air purifiers AllerAir AirMedic+